The LPWM1 PG is a pulse width modulation based dimmer. It is typically used for dimming dash LEDs in positive ground systems.

LPWM1 specifications

• Input: -12V dc positive ground
• Output: 12V dc pwm signal, max. 3 A output, off/on position plus min to max brightness
• Dimensions (approx.)  L (not including shaft) 1.375" x W 1.25" x .75"
• Shaft length .56", standard 6mm diameter
• Ships with mounting nut, knob, adaptor shaft, velcro and tie wrap.

The following Litezupp LEDs are compatilbe with the dimmer.

E10 screw base - LDS12-5 series, LDS12-18DS series 

T10 wedge base - LDW12-5 series, LDW12-18DS series

BA9S Bayonet base - LDB12-5 series, LDB12-18DS series

Note: Some constant current LEDs may not be dimmable with this unit such as the Litezupp Lxx12-10CC series.

When installing, if you have a rheostat, you can either set it to max or bypass it.